FM Transmitter 40000W – HIGH POWER
40kW FM Transmitter
Professional 40000 Watts FM Transmitter
The series belongs to the High Power VHF product family of FM Radio Transmitters fully solid state technology air cooled
The ELETEC 40kw is realised with last technology, that allows drastic decrease of the temperature to a sensitive reduction of the consumptions.
ELETEC 40Kw is a system of total quality thanks to a diagnostic remote, fast and capillary assistance, low consumptions, duration in the time and it is
easy to use.
Combining the basic form AMP5000 we have gotten transmitters from 5Kw to 40Kw in configurations from 1 0 to N 1. All the components of the series shared the same characteristics to the RF module, power supply, logics of control, systems of protection, derating, facility of installation and simplicity of setup. The advantages of the module systems are as follows:
• All technological improvement on the basic product is directly transferred on the apparatuses of the serie
• Automatic diffusion of the knowledges and maintenance
• Interchangeability and independence of the each module base
• Common parts of exchange on the whole series
System of the power supply switching by PFC (380 V. three-phases), high efficiency.
Logic proportional protection without interruption of the operation, predisposition for telemetry
The ELETEC 40Kw is composed by:
8 x AMP 5000, combiner in 8 input, Exciter 25, Group fan aspiration of series, Rack from 35 U, options: dual drive and telemetry by sms or IP
Frequency range: 87.5 – 108 MHz
Low pass fi lter: Band 87.5 MHz – 108 MHz
Corrosion All the mecanical part are yellow alluminium
Measure point Monitor RF
Visualized parameters More than 50 visualized parameters on display LCD
Setting parameters operation From the frontal panel through encoders and LCD
CPU yes
Redundance power supply yes
Redundance fan yes
Transistors ICEFET
Type of transistors Freescale MRF6VP5600
CONNECTORS
Output RF connectors 3 1/8”
Input RF connectors N
Audio input chanel L/R XLR female
Input connector MPX BNC female
Connector SCA BNC female
RF BLOCK
General stability of the output power /-0,1 dB
Output Impedence 50 ohm
Armonich suppression > 70 dB
Spurie suppression > 80 dB
Input impedance 50 ohm
Gain 18dB
Threshold of ROS Software 11 % output power
Threshold of ROS fast hardware 11 %
AM residua asincrona 0,10%
AM residua sincrona 0,20%
Effi ciency 72% tip.
COOLING SYSTEM
Different temperature of the air in entrance / gone out 15 °C
Type of cooling Forced air
ENVIRONMENTAL CONDITIONS
Temperature (working) -20° 45 °C
Temperature (not working) -20° – 70 °C
Umidity (working) 95% a 40 °C
Umidity (not working) 90% a 65 °C
Altitudine (working) >4.600 meters
Altitudine (not working) >15.000 meters
