AM Solid State Transmitter 5,000 watts
5kW AM Transmitter
Affichage de 217–240 sur 323 résultats
-
-
10 kW Solid State AM Transmitter
10 kW AM Transmitter, High power, solid state transmitters for AM radio broadcast
Compact Cabinet Steel 100% Solid State MOSFET Technology Modulation PDM Modular Architecture Power Modules connected PLUG-IN Power Modules 16 of 1,000 watts C / U Protections of all its parts with fault signaling
-
AM Transmitter Solid State 15000 watts
AM Transmitter Solid State 15000 watts Compact Steel Cabinet 100% Solid State MOSFET technology Modulation PDM Modular Architecture Power Modules connected PLUG-IN 20 Power Modules of 1000 watts.
-
TUNIPOLE AM FOLDED ANTENNA
TUNIPOLE AM FOLDED ANTENNA KIT 1/4 wave Tunipole or Folded Monopole Intalation Kit requires just the necessary tower structure antenna with the ordered height. No more superstructures to improve bandwidth. Due to its Independence of the plane of radials, although studies of this antenna have considered the classic ground plane, experiences have been made with the…
-
Vertical Polarization 5 – 8 elements FM Log Antennas 6-7.5 db gain
Vertical Polarization 5 – 8 elements FM Log Antennas 6-7.5db gain Model EAK-5N Vertical Polarization 5 – 8 elements FM Log Antennas with 6-7.5dbd gain, FM Log antennas 5 and 8 elements, wide band, entirely made of aluminum and stainless steel screws, they are light and completely demountable. All the metal parts are electrically grounded, they have a…
-
BROADBAND LOGARITHMIC ANTENNA FM BROADCAST
5-element FM directional logarithmic antenna with a maximum capacity of 800W and N-type connector, totally made of Alodina treated with aluminum with stainless steel clamps and screws. They perform excellent gain and a radiation pattern without secondary lobes. All metal parts are grounded to avoid potential lightning problems.
-
-
-
BROADBAND LOGARITHMIC ANTENNA FM BROADCAST
Directional logarithmic antenna 8 elements with maximum capacity of 2KW and connector type 7/16 ″ totally made of Alodina treated with aluminum with stainless steel clamps and screws. It is lightweight and completely removable, designed to reduce volume and shipping cost, but offering excellent gain and a sidelobe-free radiation pattern and ideal forward-reverse ratio. All metal parts are grounded to avoid potential lightning problems.
-
FM Combiner Double Bridge
FM Combiner Double Bridge FM Combiner Double Bridge channel spacing > 2.5 Mhz Made of aluminum, silvered copper and PTFE. They are composed of two cavity filters and 2 hybrid couplers, they have a selective input and a broadband. It is therefore necessary , in order, knowing all the frequencies of use. The cavity filters…
-
FM power splitters
FM power splitters They are made of aluminum and externally powder painted. With PTFE insulator and washers o-ring on connectors and closure caps. Here you can find the various models and the typical partition reports that usually serve to realize antenna systems with reduced secondary lobes or complex structure. FM Power Splitter: Low inserction loss…
-
FM Cavity Filter – Double Coaxial
FM Double Coaxial Cavity Filter
FM double coaxial cavity in quarter wave high “Q” with variable coupling.
Installed between transmitter and antenna, provides an output signal free from spurious and a perfect isolation from other emissions.
Made of aluminum with internal lines of silvered copper and PTFE insulators.
These cavity filters have a B.W. command that allow you to adjust selectivity. -
-
FM Transposer 30, 100, 250W
30W, 100W, 250W Relay System FM Repeater FM Booster FM Transposer FM Rebroadcast
-
FM Transposer 1KW – 1000W
FM Transposer 1KW – 1000W 1KW FM Transmitter FAL 1000 With High fidelity FM Receiver 87.5-108 Mhz range for rebroadcast applications Great performance in presence of strong electromagnetic fields Band pass filter include Front Panel IF monitoring All Functions via LCD Optional Remote Control Software TECHNICAL SPECIFICATIONS Frequency Range: 87.5 –108 Mhz Modulation: FM Class F3…
-
FM Directive Antenna – EP3
FM Directive Antenna – EP3 Broadband FM Directional Antenna / 3 elements Yagi 87.5- 108 Mhz – Linear Polarization 3-element – Broadband: Suitable for single channel or broadband operations with multi-channel combiners. – Easy Installation: The standard mounting brackets are designed for instant installation on poles with diameters from 32 to 90 mm. Special brackets…
-
-
Yellowtec YT3305 M!ka Aluminium Mic Arm w/Sign. XL
Yellowtec YT3305 M!ka Aluminium Mic Arm w/Sign. XL ON Air Light Standard Alu model max 2 kg XLSize Bright LED ‘On Air’ signalling XL sizes fit any desktop requirement Sturdy aluminium tube construction Durable, silk-mat anodized finish Interior coil spring system supports microphones of up to 2 kg (4.5 lbs) Adjustable friction joints Fully compatible…
-
-
TV UHF Antenna Panel
TV UHF Antenna Panel 8 elements, on request we make it for vertical or horizontal polarization. Mounted on the 4 faces of a tower, it determines a radiations diagram almost omnidirectional
-
-
VHF Band III TV / DAB Antenna
VHF Band III TV / DAB Antenna 174-230 MHz – 7,0 dBd gain – Max 3 kW
-
7/16 connector male for ½” cable
7/16 connector male for ½” cable 7/16 connector male for ½” Celflex cable
-
STL STUDIO LINK 1.3÷2.4 GHz
STL STUDIO LINK 1.3÷2.4 GHz Studio link transmitter, studio transmitter link, or STL Low distorsion Low Noise High Freq. Range from 1.3GHz to 2.4GHz 5w Easily and quickly programmable AC Voltage 230V High frequency stability LCD Display
